Repco Solutions

The Repco range of products was borne out of an idea for Zoom Corrosion Technology to develop their own brand of novel cold curing materials for repairing, bonding and corrosion prevention. This solvent free cold curing polymer technology allows for repair and coating solutions in the Marine, Power, Chemical, Water Distribution, Waste Water, Petrochemical, Oil and Gas Industries.

Our Corrosion Protection products are ideal for protecting metallic and concrete surfaces from weathering, UV degradation, chemical and abrasive attack. The extensive product range is based on a variety of polymer systems including, epoxy, epoxy novolac, polyurethane both 1K and 2K, polyurea, silicone and acrylics, and the products are formulated both as repair pastes and high build protective coatings.

Although the Repco brand has been newly launched, the product is based on proven technology, Researched and developed over many years by professionals in the polymer industries.

All Repco products are developed and manufactured in the UK under strict Internationally recognised quality controls.

Technical Data

Repco Metal Repair Systems

1101 Engineering Grade Paste – A two component solvent free metal filled engineering grade epoxy paste.
Technical Data | Product Specification

1102 Engineering Grade Fluid – A two component solvent free metal filled engineering grade epoxy fluid.
Product Specification

1103 ER Stick – Solvent free epoxy putty leak repair in stick form.
Technical Data | Product Specification

1104 ST Fluid – A two component solvent free fast curing epoxy fluid. Surface tolerant with surfaces contaminated low viscosity oil and lubricants.
Technical Data | Product Specification

1105 Aqua Stick – Solvent free epoxy putty in stick form for underwater repairs.
Technical Data | Product Specification

1106 ST XF Paste – A Two component surface tolerant solvent free fast curing epoxy paste suitable for wet or underwater applications.
Technical Data

1107 XL Engineering Grade – Two component solvent free epoxy paste with extended working life.

Repflo Ceramic Fluid Flow Coatings And Abrasion Repair Systems

UP TO 60°C IMMERSION

Repflo 2201 Ceramic Paste – Two component solvent free ceramic filled epoxy paste for repairs to corrosion pitting and abrasive environments.
Technical Data | Product Specification

Repflo 2202 Ceramic Coating – Two component solvent free ceramic filled epoxy coating for protection of equipemnt operasing in harsh and abrasive environments.
Technical Data | Product Specification

Repflo 2203 Hydroflow – Two component solvent free hydrophobic epoxy coating designed primarily to increase flow efficiency.
Technical Data | Product Specification

Repflo 2041 Ceramic MW – Two component solvent free epoxy paste containing small ceramic beads – ideal for medium wet and dry abrasive environments.
Technical Data | Product Specification

Repflo 2042 Ceramic HW – Two component solvent free epoxy paste containing 1.5mm ceramic beads for high abrasive wear environments.
Technical Data | Product Specification

Repflo 2043 Ceramic UHW Flex – Two component solvent free epoxy paste containing 2-3mm ceramic beads for extreme impact/ abrasive environments.
Technical Data | Product Specification

Repflo 2044 Ceramic HT – Two component solvent free epoxy novolac paste containing 1.5mm ceramic beads for high abrasive wear environments in elevated immerson/ operating temperatures.
Technical Data | Product Specification

2209 PU Coat – Two component solvent free polyurethane coating for high impact environments.
Technical Data | Product Specification


HYDROCARBONS, ALKALIS & SOLVENTS 130°C IMMERSION

Repflo 2205 HTC – Two component solvent free epoxy novolac high performance coating for abrasive environments at elevated immersion temperatures and pressures.
Technical Data | Product Specification


ACIDS UP TO 110°C IMMERSION

Repflo 2206 HTAC – Two component solvent free epoxy novolac coating for abrasive environments at elevated immersion temperatures in mineral acid solutions.
Technical Data | Product Specification

Repcoat Underwater Repair Coating Systems

Repcoat 2208 UW – Two component thixotropic solvent free epoxy coatings designed to be applied in wet or underwaterenvironemtns to metallic and concrete structures.
Technical Data | Product Specification

Repcomp Pipe & Composite Repair Systems

FAST CURE LOW PRESSURE PIPE REPAIR – UP TO 150psi

Repcomp 3308 ER Bandage – Fast curing water activated emergency pipe repair tape.
Product Specification


HIGH PRESSURE PIPE REPAIR – UP TO 300psi

Repco 3302 Epoxy Repair Paste – Two Component solvent free surface tolerant epoxy repair paste.
Technical Data | Product Specification

Repcomp 3301 Resin Wrap – Two component solvent free epoxy gel for use with 701/702 glass tape for composite repairs to large diameter pipework.
Technical Data | Product Specification

701 Glass Tape

703 Glass Tape


PIPE SEALING COMPOUND

3580 Cast & Seal – Two component solvent free silicon sealing fluid, designed to seal leaking gas and vapour lines.

3589 Adhesion Promoter – Single component solvent based adhesion promoter for use with Resichem 580 Cast and Seal.


REPFLEX FLEXIBLE REPAIR SYSTEMS

Repflex 4401 GP 60 – Two component solvent free elastomeric polyurethane suitbale for repairs to rubber surfaces.
Technical Data | Product Specification

Repflex 4402 GP Primer – Single component solvent based isocyanate adhesion promoter for metallic and rubber surface for use with Resiflex products.
Technical Data

Repchem Corrosion And Chemical Protection - Steel

LOW CONCENTRATION CHEMICAL IMMERSION UP TO 60°C

Repchem 5501 IGCR – Two component solvent free epoxy coating, low temperature surface tolerant chemcial and corrosion coating.
Technical Data | Product Specification

Repchem 5503 IGXL – Two component solvent free epoxy coating with an extended working life, chemical and corrosion coating.

Repchem 5504 IGAR – Two component solvent free abrasion resistant epoxy coating.

Repchem 5502 IGFE – Two component flow enhaanced solvent free epoxy corrosion coating, applied in a single coat.


HIGH CONCENTRATION CHEMICAL IMMERSION UP TO 60˚C

Repchem 5511 UCEN – Two component solvent free epoxy novolac coating for full concentration chemical immersion.
Technical Data | Product Specification


HIGH CONCENTRATION CHEMICAL IMMERSION UP TO 60˚C- 90˚C

Repchem 5512 UCEN 90 – Two component solvent free epoxy novolac chemical coating for full concentration chemical immersion at elevated temperatures.
Technical Data | Product Specification

Repchem 5512 UCEN 90 XL – Two component solvent free epoxy novolac chemical coating for full concentration chemical immersion at elevated temperatures which can be applied by standard airless spray.

Repchem 5513 AREN – Two component solvent free epoxy novolac coating for full concentration chemical immersion at elevated temperatures where abrasion resistance is required.


FLEXIBLE CHEMICAL PROTECTION – SHORT TERM IMMERSION (72HRS) IN HIGH CONCENTRATION CHEMICALS

Repchem 5583 HTUC – Single component solvent free silicon coating for short term immersion conditions and splash resistance to high concentration organic chemicals such Acetic & nitric acid.

Reptherm Corrosion Under Insulation Protection - and Thermal Barriers Steel

HEAT ACTIVATED COATING ON HOT SURFACES UP TO 240˚C

Reptherm 5530 HA – Single componant heat activated coating for use on hot surfaces to protect against CUI.
Technical Data | Product Specification

FAST CURING THERMAL COATING

Reptherm 5560 TB XF – Two component solvent free epoxy insulating coating applied to offline process surfaces at 5 – 45C, once cured will operate at 50-140C. Provides both a corrosion protection and insulation coating.
Technical Data | Product Specification

THERMAL COATING

Reptherm 5561 TB – Two component solvent free epoxy insulating coating applied to online process surfaces, operating at temperatures 50-140C to provide both a corrosion protection and insulating coating.
Technical Data | Product Specification

ULTRA HIGH TEMPERATURE THERMAL COATINGS

Reptherm 5563 TB 250 – Single component solvent free silicon insulative coating applied to offline process surfaces at 545C, once cured will operate at 50-250C.

Reptherm 5589 Adhesion Promoter – Single component solvent based adhesion promoter for use with 563 Siltherm 250.


REPRIME AND STEEL CORROSION PROTECTION


PRIMERS

Reprime 6503 AP – Two component solvent free epoxy primer for cementitious surfaces.
Technical Data | Product Specification

Reprime 6503 AP XL – Two component solvent free epoxy primer for cementitious surfaces with an extended working life.

Reprime 5506 APZ – Two component solvent based epoxy, thin film corrosion coating.
Technical Data | Product Specification

Reprime 6505 DS – 2 component solvent free epoxy primer for green or damp cementitious surfaces.

Reprime 5509 MCU 125 – Single component solvent based moisture cured polyurethane primer for metallic and cementitious surfaces.

Reprime 5510 MCU 126 – Single component solvent based moisture cured polyurethane primer for metallic and cementitious surfaces.

Reprime 6559 ABP – Single component solvent based acrylic based primer for asphalt/ bitumen based surfaces.


BASE COAT

Repcoat 5507 PUW – Two component solvent free polyurethane coating, UK drinking water approved.

UV STABLE TOP COAT

Repcoat 6508 UVPU – Two component solvent based UV Stable polyurethane top coat.

Repcoat 6555 UVWB – Single component water based UV stable acrylic membrane for corrosion protection of concrete and metallic surfaces.

Reproof 554 UVRB Membrane – Single component solvent based rubberised UV stable acrylic membrane for cold climate waterproofing of roof surfaces.

Reproof and Flexible Liquid Membranes

WALL COATINGS

Repcoat 6520 UVAG – Two component water based UV stable polyurethane wall coating, semi gloss finish – anti graffiti properties.

Reprime 6521 GPLV – Two component water based thin film epoxy primer for porous surfaces.

Repcoat 6522 WBLV – Single component water based acrylic sealer for porous surfaces.

Repcoat 6523 WBAC – Single component water based UV stable acrylic anti-carbonation wall coating.

Repcoat 6556 Clear Cladding – Single component water based emulsion for sealing of stone, concrete and brisk surfaces.


ROOF AND WATERPROOFING PROTECTION SYSTEMS

Reproof 6550 GPM – Single component water based UV stable acrylic membrane for waterproofing roof surfaces & annular tank bases.
Technical Data | Product Specification

Reproof 6551 ERM – Single component solvent based UV stable acrylic membrane for short term/emergency waterproofing of roof surfaces.

Reproof 6552 CSM – Single component high build water based UV stable acrylic membrane for waterproofing roof surfaces & tank bases.

Reproof 6557 EC 661 – Single component water based UV stable acrylic membrane for corrosion protection of concrete and metallic surfaces.

Reproof 6558 UV 662 – Single component water based UV stable acrylic membrane for corrosion protection of concrete and metallic surfaces.

Repfloor Repair and Protection

CONCRETE REPAIR SYSTEMS

Repcon 6570 QC – 3 component fast curing solvent free epoxy mortar for repairs to cementitious surfaces.

Repcon 6571 LW – 2 component light weight solvent free epoxy repair mortar for overhead and vertical cementitious surfaces.

Repcon 6572 NP Screed – Polymer modified cementitious render/screed capable of resisting 10 bar (145psi) positive/negative hydrostatic pressure.

Repcon 6573 QCNP Screed – Fast curing polymer modified cementitious render/screed capable of resisting 10 bar (145psi) positive/negative hydrostatic pressure.

Repcon 6574 QC Plug – Ultra fast curing polymer modified cementitious putty for sealing live leaks in cementitious surfaces.
Technical Data

Repflex 6575 EJ Filler – Two component solvent free polysulphie PU for reinstating damaged expansion joints.

Repcon 6576 HP Quartz – 3 component solvent free epoxy repair screed for reinstating damaged cementitious surfaces in heavy traffic areas.
Technical Data | Product Specification

Repcon 6577 Chem Screed – 3 component solvent free epoxy novolac screed for reinstating damaged cementitious surfaces. Resists full concentration acids such as 98% sulphuric acid.


CONCRETE COATING SYSTEMS

Repfloor 590 EPFC – Two component solvent free epoxy floor coating with a gloss finish.

Repfloor 593 EPAS – Two component solvent free epoxy floor coating designed to discharge static electricity.


TECHNICAL FABRICS

804 Flextech glass fibre mat – For use with waterproofing and roofing systems.

805 Flextech glass cloth – Woven glass scrim for use with 3301 Repcomp Resin Wrap.

806 Flextech reinforcement mesh – lightweight polyester mesh for use with 6550 and 6583.

807 Flextech reinforcement tape – Polyester mesh for use with Repco and Repflo repair pastes.

808 Flextech reinforcement tape – Polyester mesh for use with Repco and Repflo repair pastes.

809 Flextech surface tissue – Surface veil used with glass fibre chop strand to reduce impefections.


ACCESSORIES

707 Fairing compound

708 Sealer Filler

709 Resin Removing Cream

901 Mixing board

902 Spatula

903 Applicator tool

904 Release Agent

905 MEK Cleaner